Digitus DN-70230, User Manual

Page: 51 / 56

45
3.11 Backup Your Disk (Model A)
USB media adapter provides disk backup function let user can backup his external disk simply
from USB-2 port (Slave HDD ) to USB port (Primary HDD) . User can follow procedures below
to backup his external disk.
1. Plug external HDD in both USB port and USB-2 port as below.
2. Push “ Backup ” button for two seconds to start backup process and then USB/USB-2 LED will
be blinking at the same time.
3. Find backup data in the folder of HDD in the USB port (Primary HDD) as below:
Path : \PUBLIC\usb_backup\yyyymmddxxx.
(xxx is series number, Ex: \usb_backup\Public\20100609
001 )
TIP : 1) If the backup process failed, the USB LED will stop blinking and Status/USB-2 LED will
blink in ten seconds at the same time. Please check the capacity (Primary HDD > Slave HDD)
and format type (FAT32 available only) of both disk again.
2) If user wants to stop backup process, please push “Backup” button for two seconds again.