10
User Settings
1.
Modify factory password (Such as: modified to 123123)
1)
Modify the factory user password "1234” +
OK
key or modify the
factory management password "
4321
” +
OK
key, buzzer “di……” a
long sound light permanent bright
2)
Hold down again
OK
key more than 2 seconds, Lights flashing
3)
Enter a new password"1234” +
OK
key, “di……
”
a long sound,
Password changed successfully
•
Password length can be set to 4 ~ 15 digits, the administrative password
and the user password cannot be set to the same password
2.
Enable common mode, Set a temporary password
Enable common mode
1)
Enter the correct administration password “****” + OK key, buzzer
“di……” a
long sound light permanent bright
2)
Hold down again
OK
key more than 2 seconds, lights, flashing
Press it again
OK
key
3)
Enter number "4, 4” Press the
OK
key, “di……” a long sound
Set a temporary password
1)
Click on the
OK
key, lights flashing
2)
Enter a 4 - 15-bit password
3)
Click on the
OK
key, buzzer “di……” a long sound light permanent
bright, the temporary password has been set successfully, when you
go into standby mode, The light will flash every three seconds
•
Temporary passwords can only be used effectively once, automatic failure
after use
Special function description
1.
Password forgetting and decoding
2.
When the user accidentally forgets his password, please provide the
16-digit code on the right side of the lock to customer service, they will
send you a reset code and then the lock will reset after you enter the
reset code.
3.
False password input
4.
Password error alarm
5.
Enter the wrong password four times in a row to open the lock, this will
lock the keyboard for 60 seconds, and send out alarm prompt sound, any
key pressed during this period will not work
6.
Battery undervoltage indication