6
•
To Adjust Maximum Height Limit (72~128cm/28.3”~50.4”)
Step 2: Programming
Press “M” and the Current Maximum Height Limit
(“128” by default) is displayed. Press “UP”/“Down”
to set your desired height.
Note:
Note: For display range reason, the display will not count the number immediately
as you press the up and down buttons under the setting of metric system.
Step 3: Saving
Press “1” to save. “H-S”- successful; “H-F”- failing
•
To Adjust Anti-Collision Sensitivity (Current Sensor)
(Level 0~Level 5)
Step 2: Programming
Press “M” for twice and the Current Anti-Collision Sensitivity
(“cc3” by default) is displayed. Press “UP”/ “Down” to set your
desired level.
Step 3: Saving
Press “1” to save. “S-S”- successful; “S-F”- failing
•
To Adjust Anti- Collision Sensitivity (Gyro Sensor)
(Level 0~Level 5)
Step 2: Programming
Press “M” for three times and the Current Anti-Collision Sensitivity
( sc3 by default) is displayed. Press “UP”/“Down” to set your
desired level.
Step 3: Saving
Press “1” to save. “S-S”- successful; “S-F”- failing
•
To Change the Current Height and Desktop Thickness (0~5cm/0~1.9”)
Step 2: Programming
Press “M” for four times and the Current Desktop Thickness
(“t0.0”by default) is displayed. Press “UP”/“Down” to set your
desired height.
Step 3: Saving
Press “1” to save. “T-S”- successful; “CT-F”- failing
•
To Change the Screen Lock Function (0:OFF/1:ON)
Step 2: Programming
Press “M” for five times and the Current Screen Lock Setting
(“Za-1” by default) is displayed. Press “UP”/“Down” to set your
desired locking function..
Step 3: Saving
Press “1” to save. “A-S”- successful; “A-F”- failing
Note:
If you keep pressing “M” for six times the Fatigue Test Menu (“r-0”) will be displayed. For
the product safety, please do not change any setting of this process.
Note:
To abort a custom process, press the “T” button or wait approximately 8 seconds until
the display automatically returns to show the height of the desk.
The max./min. height limit displayed in the custom mode doesn’t include the thickness
of desktop.
Summary of Contents for DA-90392
Page 6: ...5...
