2
Memory Setting:
Adjust the desk to your desired position. Press the "M" button, then "S-"appears on the
display. Meanwhile press "1","2" or "3", the memory is successfully set. Press "1", "2" or "3"
to get to the programmed memory position. Press any button to stop the motion.
Screen Lock/Unlock:
Note:
To auto-lock/lock/unlock, please ensures the lockable display function is ON first. For this
CT-08 touch digital control, screen lock function is ON by default. Refer to “PART 3 – Custom
Programming Guide” and change the screen lock setting.
Auto-lock: When no actions are made for over 1 minutes, the screen will lock automatically
and the display shows“---”.
To lock: press "M" for 3s and the display shows "---".
The screen has been locked and any operation is invalid.
To Unlock: press "M" for 3s and the display shows the current height.
Changing between CM and INCH:
Press "T" for 8s. From "cm" to "inch",beeps twice. From "inch" to "cm" beeps once.
Reset Mode:
Press "UP" and "DOWN" simultaneously until the buzzer beeps.
(The desk will move down to the lowest position then raise a little. Please make sure you never
release the button during the process.)
