3.
Install the hard drives and replace the rear cover.
4.
Connect the product into the PC USB 3.0 port by USB3.0
cable, HDD LED should turn ON to indicate the SATA hard
drives were detected.
5.
Format the drives.
6.
Done
Note: Changing the RAID mode will require you to re-format the
drivers. Make sure to backup all existing data first!
※
Normal Mode (Non-Raid):
Normal mode, it's the default setting of HDD enclosure, and will
not use any RAID mode. In Normal condition, both of the two
hard disk mode inside the enclosure are in independent
operation state, and also will be identified as the two separate
hearts in the system, users can choose any hard drive for
storing files. If one piece of hard disk is damaged, the other
piece of hard disk data would not be influenced.
