Digitus DA-70547, User Manual, Page: 2 / 20

Introduction
DA-70547 is a USB3.0 enabled dual-SATA hard drive enclosure. It supports
simultaneously use of two 2.5” or 3.5” SATA hard disk for both data read and data
write. It also is downward compatible with USB2.0 and USB1.1. The maximum
transfer speed of USB3.0 can reach 5Gbps. The actual transfer speed of DA-70547 is
200M/s. DA-70547 provides high storage capacity, high data transfer rate, and best
data protection. It’s easy to use the design which can satisfy both regular users and
professionals of the ever-increasing demand for large and efficient data storage
media.
Function
 Support USB3.0 SUPERSPEED mode max 5Gbps/ USB2.0 HIGH-SPEED mode
480Mbps/USB1.1 FULL-SPEED 12Mbps
 Support SATA I (1.5G) / SATA (3G) HDD
 Achieves transfer speeds of up to 200MB/s
 Downwards compatible with any USB2.0 enabled computers and notebooks
 Easy to Install and Set-up
 To achieve USB3.0 transfer speeds, a USB3.0 interface card with USB3.0 cable is
required
 Supported OS: Windows 7 (32/64-bit), Vista (32/64-bit), XP(32/64-bit)
One Touch Back-Up function
User’s Manual
Notice
 The type of file system is able to support FAT32 and NTFS both..
 When users operate the PC Clone EX Lite, the login must be from Administrator; it
can not login from the Guest or any authorized account.
 Does the hard disk happen to the bad sector? Please confirm in advance that can
prevent an improper operating of backup or restore.
System Requirements
 Pentium computers or 100% compatible computers.
 Support OS: Microsoft Windows 98SE/ME/200/XP/Vista/7.
 CPU Pentium or above
 128 MB RAM
 Display card: compatible with VESA standard
 An external USB hard disk