4pin Power
C
USB2.0 Power Plug(red)
Power/Activity-LED
(blue & red)
USB2.0 Plug
SATA Plug for
SATA device
44-pin IDE plug for
1.8/2.5 IDE HDD
40-pin IDE plug for
3.5/5.25 IDE device
Note: For 3.5/5.25 IDE devices, please plug in a 5V/12V power
supply (not included) to appropriate port on the back side of
HDD or DVD, so that the PC power switch (on/off) can’t control
the current to HDD or DVD. If you want to cut off the current to
HDD or DVD, then you need to plug out the power plug from
3.5” IDE HDD or 5.25 DVD devices.
Both IDE and SATA plug are protected against polarity
reversal and should be easily connected to the device. If not,
Pease check if you use the plug in the right way. Please be
sure, that your IDE device is configured as MASTER.
