6. Bluetooth/Line in performance /Indicator
•
When open the speaker, the light indicator will turn blue
•
When speaker in pairing mode, the light indicator will turn flash blue
•
Re-start the speaker, it will re-connect last device, you will hear ”beep…” in two
times, one time is researching the device, second time is pairing the device
automatically.
•
When plug 3.5mm jack cable, the light indicator will turn green
Set-up and Pairing via Bluetooth For Music Playback
The following instructions apply for a mobile phone but the procedure is the same
for a music player, except that you may not need to give the Bluetooth passcode.
1. Push the power key to “on”, you will hear ”beep..….” Sound.
2. Ensure that the speaker and the phone is on, press the play/pause buttons in 4
seconds to re-start the Bluetooth to connect to your device in first time using.
3. The Bluetooth speaker will reconnect in 30 seconds when restart after power off, it’s
forbidden to operate this time.
4. Activate the Bluetooth function on the phone, and set it to search for the phone, and
set it to search for Bluetooth devices.
5. Select the Bluetooth speakers”DA-10287” from the list of found device.
6. Enter the Bluetooth passcode 0000 to pair and connect the speaker to the phone. In
some phones you may need to make the connection separately after pairing.
If the pairing is successful and the speaker is in a Bluetooth connection with the music
device, the blue indicator light flashes about every 2 seconds, and you will
hear ”beep..…”sound
