Page 22 of 26
Pressing any Keys excluding number key [ 1 ], [ 2 ], [ 3 ] and [ 4 ] to
turn off the AutoScan Mode and the monitor screen will jump back to
the original Host.
When you activate the Auto-Scan mode, the USB KVM Switch
alternates between the two PCs and displays them on the monitor.
Each PC can be displayed at 5, 10, 15, or 20 seconds:
4.3 Auto-Scan Interval
[n] *(Available only when Auto-Scan function is ON)
You can change the Auto-Scan interval by pressing the appropriate number
key or the number pad keys.
n
Scan Interval
[1]
5 sec.
[2]
10 sec.
[3]
15 sec.
[4]
20sec.
