manualshive.com logo in svg

Digitus 16 PORT GIGABIT ETHERNET NETWORK SWITCH, User Manual, Page: 32 / 115

Share
Download
Digitus 16 PORT GIGABIT ETHERNET NETWORK SWITCH User Manual Download Page 32

User Manual   

 

 

 

Coaxial/STP/UTP

IEEE 802.2 LLC

IEEE802.3 CSMA/CD MAC

 

IEEE 802.3 PLS

ANSI X3T9.5 PMD

CS

IEEE 802.3

 

MAU

 

Physical

Layer

Data

Link

Layer

MII

 

Fiber 

 

 

 

 

 

 

 
 

 

 
 
 
 
 

 

This above diagram shows the Ethernet architecture, LLC sub-layer and 

MAC sub-layer, which are responded to the Data Link layer, and transceivers, which 
are responded to the Physical layer in OSI model.  In this section, we are mainly 
describing the MAC sub-layer. 

  

Logical Link Control (LLC) 

 

            

Data link layer is composed of both the sub-layers of MAC and MAC-client. 

Here MAC client may be logical link control or bridge relay entity.  

Logical link control supports the interface between the Ethernet MAC and 

upper layers in the protocol stack, usually Network layer, which is nothing to do with 
the nature of the LAN. So it can operate over other different LAN technology such 
as Token Ring, FDDI and so on. Likewise, for the interface to the MAC layer, LLC 
defines the services with the interface independent of the medium access 
technology and with some of the nature of the medium itself. 

Publication date: Septembery, 2007  
Revision A3 

24 

Summary of Contents for 16 PORT GIGABIT ETHERNET NETWORK SWITCH




















































































































Reviews:

No comments