2.
RX Receiver
①
Power input
Connect with included DC12V2A power adapter (It is
recommended to power from the receiver unit)
②
Transmission signal
indicator
1.
LED 1: It turns on when power on.
2.
LED 2:
It turns on when the transmitter unit and the receiver
unit connect well with each other, and it flashes when
there is no transmission between the transmitter unit
and the receiver unit.
3.
LED 3:
It flashes when the receiver unit connected well with
the HDMI display device, and it turns off when no
transmission between the receiver unit and the display
device.
③
HDBT input
To connect with receiver by network cable
④
HDMI output
Connect with HDMI display device
⑤
Reset button
Press for restarting the unit
⑥
RS232
RS232 control
⑦
IR receiver extension
cable interface
Connect with IR receiver extension cable. Please make
sure the remote control is within the required range of
IR receiver
⑧
IR blaster extension
cable interface
Connect with IR blaster extension cable. Please put the
IR blaster close to source device to best transmit the IR
signal from receiver
