Mounting Installation
This section describes how to install the Industrial Equipment and make
connections to it. Please read the following topics and perform the
procedures in the order being presented.
Note:
In the installation steps below, this Manual use 8 Port Industrial
Gigabit Switch as the example. However, the steps for Industrial slim
type Switch, Industrial Media/Serial Converter and Industrial PoE
equipment are similar.
DIN-Rail Mounting
The DIN-Rail is already screwed on the Industrial Equipment. Please refer
to following figures and know how to hang the Industrial Equipment:
Step 1:
Lightly press the button of DIN-Rail into the track.
Install Industrial Equipment in DIN-Rail mount.
