Digiturk 42PF5040, Operating Instructions Manual

Page: 27 / 44

English - 26 -
Viewing the Connections
AV Cable
(not supplied)
Scart
Connection
(back)
VGA
Connection
(back)
PC/YPbPr Audio
Connection
(side)
PC Audio Cable
(not supplied)
HDMI
Connection
(back)
SPDIFF
Connection
(back) SPDIFF
Side AV
Connection
(side)
Headphone
Connection
(side)
USB
Connection
(side)
Connector Type Cables Device
HEADPHONE
CI
Connection
(side)
CAM
module
SIDE
A
V
(not supplied)
(not supplied)
(not supplied)
(not supplied)
(not supplied)
SIDE
A
V
NOTE : When connecting a device via the Side AV input, you must use the supplied connection cables to enable
connection. See the illustrations above. | To enable PC audio, you will need to use the supplied SIDE AV CONNECTION
cable’s WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV will automatically switch to
AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via
the scart socket. | When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of
the TV before mounting on the wall. | Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer
to the module instruction manual for details of the settings.
Obtain the Conditional Access Module (CAM) and the viewing card by subscribing to Digiturk. Insert the CAM and then the
viewing card to the slot that is located in the terminal cover at the rear side of the TV. The module should be correctly inserted,
it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.
You can use the VGA input for connecting a YPbPr device. To do this, you need a YPbPr to PC cable (Not supplied).