Digitronic
Digital-Analog-Converter
Automationsanlagen GmbH
CamCon DAC16
Table of contents
1. Introduction .......................................................................................................................................... 3
2. Assembling .......................................................................................................................................... 4
3. Status LED´s........................................................................................................................................ 4
4. Dimensions .......................................................................................................................................... 4
5. Electrical connections .......................................................................................................................... 5
5.1. Terminal allocation............................................................................................................................ 5
5.1.1. Terminal allocation of the supply voltage....................................................................................... 5
5.1.2. Terminal allocation of the analog input 1 ....................................................................................... 5
5.1.3. Terminal allocation of the analog input 2 ....................................................................................... 5
5.2. External interface .............................................................................................................................. 5
5.2.1. Pin allocation of the external interface IN ...................................................................................... 5
5.2.2. Pin allocation of the external interface OUT .................................................................................. 5
5.2.3. External interface with a wiring distance of 0.5 up to 300m........................................................... 6
6. The analog outputs .............................................................................................................................. 6
6.1. Signal level of the analog outputs ..................................................................................................... 6
7. Commisioning ...................................................................................................................................... 6
8. Technical data...................................................................................................................................... 7
1. Introduction
The digital - analog - converter CamCon DAC16 is used as an anlog output expansion for electronic
camswitches of the CamCon series. They are able to put out e.g. the speed, positiopn or values for
Cams via their external interface. If using a a CamCon DAC16 converter instead of an ordinary output
module (e.g. DC91I/O or DC16I/O), the parallel binary signal get converted into analog signals. Every
CamCon DAC16 module has two 16Bit analog outputs that can provide current- as well as voltage
signals. Inputs are not avaiable. By serial switching of several CamCon DAC16 modules, it is possible
to expand the number of modules to a maximum of 13. This provides e.g. for a CamCon DC16 up to
26 analog Cam-outputs.
Edition: Aug. 04
Page: 3
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:[email protected]
Site web : www.hvssystem.com
