24
Taking Pictures
23
Taking Pictures
1. Turn the function dial to .
• Status LCD is lit up.
• The default capture mode is (snapshot).
2. Move the lens cover slide to open the lens
cover.
• The live view will appear on the LCD monitor.
3. Press the DISP/ENTER/REP button to turn on
the LCD monitor.
• Press it again to switch off.
• If connected to TV, both preview and capture can be
operated by TV.
• The LCD monitor will switch off automatically for no-
operation status lasting for 60 seconds.
NOTICE:
• Before recording you may reset each parameter such as flash light (page 15,16),
digital zoom (page 32), image quality (page 14, 44), from the Record Mode Menu.
4. Center the subject in the LCD monitor or place
the viewfinder's focus frame on the subject.
• When holding the camera, make sure your fingers do
not cover the lens.
• Adjust the distance between camera and the subject.
Make sure the image in LCD monitor is clear.
5. Press the shutter-release button to take the pic-
tures.
• In snapshot mode, no flash, auto exposure and auto
white balance are default settings.
• The number of remaining images to be taken
decreases 1 automatically.
If the lens cover isn’t open, “PLEASE REMOVE THE
LENS COVER” will appear on TFT LCD.
6. Move the lens cover slide to close the lens.
7. Turn the function dial to to power off the
camera.
BASIC RECORDING OPERATION (SNAPSHOT)
BASIC RECORDING OPERATION (SNAPSHOT)
Summary of Contents for DSC-2100
Page 2: ......
