background image

© 2013 Digitrax, Inc. 

www.digitrax.com

— 7 —

Other LocoMotion

®

 Features: Switching Speed, Normal 

Direction of Travel & Scalable Speed Stabilization  

(Back EMF) Features

Switching speed 

is controlled by CV54. The factory setting is 000 for 

OFF. To turn on the switching speed feature, program CV54 to a value 
of 001. When this feature is on, use F6 to activate and deactivate switch-
ing speed. With the feature on the throttle’s target speed is effectively 
reduced by about 50% and the effects of accel and decel programmed 
into the decoder are reduced by 1/4. This is useful for yard switching 
operations.  
 

Normal Direction of Travel

 is controlled by CV29. See your decoder 

manual or the Digitrax Toolbox App for additional information on the 
settings for CV29.

Digitrax SoundFX

®

 System

Digitrax SoundFX lets you make your locos sound in scale like the real 
thing! The SoundFX sound CVs in the range of CV140 to CV256 let you 
customize your decoder without having to reprogram or change the 
installed sound scheme. Standard decoder CVs in the range of CV01 to 
CV120 operate the same as for a non-SoundF

X

3

 Digitrax decoders (they 

control motor and light functions etc.) CV58 is used as Master Volume, 
and CV60 is used to select an alternate scheme, if provided in the sound 
project. Sound CV155 is provided to select Diesel engine “notching” 
modes. The default of CV155=00 provides “automatic notching” that 
changes the diesel RPM settings at 8 distinct throttle speeds that are 
controlled by Sound CV132. Sound CV155=01 selects “semi-automatic 
notching” mode that allows F6 ON to increase the notch from the current 
throttle setting and F7 ON to decrease back towards the lowest current 
throttle notch setting. Sound CV155=02 selects “manual notching” mode 
that allows F6 ON to increase the notch setting and F7 ON to decrease 
the notch setting irrespective of the throttle setting, which controls just 
the motor speed. The decoder’s sound scheme can be reloaded using a 

Digitrax PR3 programmers and a sound project file from the Digitrax 

Sound Depot on our web site. Typical sound downloads take between 50 

and 100 seconds depending on the project complexity and file size. The 

following tables show the CVs used in this decoder version and how it is 
set up at the factory to operate various sounds using your throttle

Summary of Contents for SoundFX SDH166D













Reviews: