© 2014 Digitrax, Inc.
www.digitrax.com
— 6 —
Function Outputs on the DN166I2B
The DN166I2B is set up at the factory to control six functions. The unit has two
sets of outputs for directional lighting. Pads F0F/F0F+ are for the front light and
F0R/F0R+ for the rear light. Functions F1 , F2 , F3 and F4 can be used by sol
-
dering a wire from the pad for the function you wish to use to the lamp (or other
function) you wish to control.
All six function outputs can be easily set up with Digitrax FX3 lighting effects
or as standard on/off functions with the following operational qualifiers:
1. Forward or Reverse direction of travel, or
2. Whether F0 is on or off, or
3.
Both direction of travel and whether F0 is on or off, or
4. Whether the locomotive is stopped or moving.
Function Remapping
Function remapping allows you to program the function outputs of your decoder
to be controlled by selected function keys on your throttle. Please consult the
Digitrax Decoder Manual or website for information on function remapping.
F2+
F1
F2
F4
F3
F0R+
F0R
F0F
F0F+
F4+
F1+
F3+
Motor -
Motor +
