© 2016 Digitrax, Inc.
www.digitrax.com
— 4 —
Digitrax LocoMotion
®
System
Your locomotives look like the real thing, now you can make them run like the
real thing, too. Digitrax decoders incorporate torque
compensation for smooth as silk operation. You can also program CVs that
control momentum, 3 step and 128 step speed tables, switching speed, normal
direction of travel, scalable speed stabilization and more to take full advantage of
the Digitrax LocoMotion System.
Momentum-CV03 & CV04
Momentum is part of the LocoMotion System. Acceleration is controlled by CV03
and deceleration by CV04. Both come from the factory set to 000. A range of 000
to 031 is available for both accel and decel. Try CV03:003 and CV04:000 as a
starting point for experimenting with momentum.
Speed Tables-How the Loco Responds to the Throttle
With Digitrax LocoMotion, there are two types of speed tables: 3 Step Tables and
High Resolution 28 Step Tables. Please see your Decoder Manual for a discussion
of the 28 Step Tables. The 3 Step Tables are set up by programming 3 CVs: Start
Voltage (CV02), Mid point Voltage (CV06) and Max Voltage (CV05). These values
are set at 000 at the factory. All have a range of values from 000 to 255. We rec
-
ommend the following CV values as a starting point for experimenting with speed
tables.
Loco Type
V Start
CV02
V Mid
CV06
V Max
CV05
Switcher
Concentrated low speed. Limited top
speed
002
038
064
Road Switcher
Prototypical top speed w/evenly
distributed curve from 0 to top speed
002
048
098
Mainline Loco
Quick increase to cruising speed then
levels off to prototypical top speed.
002
128
154
Decoder Reset CV08
Decoder reset lets you reset all CV values to the initial factory settings. To reset all
CV values, program CV08 to a value of 008. You also have the option of reset
-
ting all the CV values except the 28 speed step tables and CV60 selected sound
scheme. To do this program CV08 to a value of 009.
