Global Block Method
Code 97#*
If you want to
block all callers
and invite only specific numbers, you can use Code 97 # * to disable
the default Global Invited List and create your own invited call list. To enable this feature, press and hold
the
Program Button
for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the
prompt for “Enter Code” displays enter
97 #*
, display shows function. NOTE: that when Code 97 #* is
stored, all calls will be Blocked, answered and hungup on until you add Invited numbers.
Creating your own Invited Caller list
You can invite preferred callers using the Invite Button on the front panel or through programming. See
Programming Numbers - Invited, VIP and Blocked on page 6.
Reset DPB Call List Settings Code 98#*
Entire Caller List Deletion WARNING: This will delete all numbers from all lists!
To delete
ALL
numbers
stored, enter programming: press and hold the
Program Button
for 3 seconds until you see
“Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays, enter
98 # *
,
display shows: “
ALL NBR DELETED
”. All numbers stored from all lists will be cleared.
Deleting Individual Invited, VIP or Blocked Numbers
To delete a single number you have stored, enter programming: press and hold the
Program Button
for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code”
displays enter
98
, enter the phone number you want to delete followed by the * key. Example for
deleting a number enter: 98, 890-555-1212 *, display shows function.
Reset DPB User Settings Code 99#*
To reset the DPB
user settings to factory settings but not delete any call lists, Press and hold the
Program Button
for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt
for “Enter Code” displays, enter
99 # *.
Display All Operating Codes Code 92
Press and hold the
Program Button
for 3 seconds until you see “Program Mode”, then “Pick Up Phone”,
when the prompt for “Enter Code” displays, enter
92
to see the current settings. The factory default list
is pg1:
16, 28, 30, 47, 49, 59,
pg2:
70, 73, 75, 77, 80, 85,
pg3:
87, 91, 96
. These codes can
change when the user enables alternate settings. See list of all operating codes and functions below.
Page
1. Code 16 FSK CID ENABLED Standard Caller ID Mode (Default)
7
2. Code 17 DTMF CID ENABLED
7
3. Code 20 SPOOFING SAVED Spoofed Number Store
2
4. Code 21 SPOOFING LIST Spoofed Number List Displayed
5
5. Code 27 CODE SAVED LCD Backlight Time
7
6. Code 28 LED ENALBLED (Default)
7
7. Code 29 LED DISABLED
7
8. Code 30 STANDARD MODE (Default)
7
9. Code 31 BUSINESS MODE
7
10. Code 32 STANDBY MODE
8
11. Code 33 SELECT MODE
8
12. Code 40 NBR BLOCK SAVED
6
13. Code 40### [number] * FIND NUMBER in Blocked List
7
14. Code 40#* BLK NBRS DELETED Deletes blocked numbers except programmed entries
7
15. Code 41 NON AUTO DEL BLK Blocked Number List Displayed
5
16. Code 42 DIALED NBR SAVED Block Outgoing number
8
17. Code 43 DIALED BLK LIST Blocked Dialed Outgoing number list displayed
5
18. Code 44 NAME BLOCK Name List Displayed
5
19. Code 46
AUTO BLK DEL ON First in First
Out Enabled
8
20. Code 47 AUTO BLK DEL OFF First in First
Out Disabled (Default)
8
21. Code 48 NAME BLK PRV ON Private Name Block Enabled
8
11
