9
After finishing loading the CD disc, press“
CD Open/Close
” key to close the door.
After reading, the unit will automatically play from the 1st song.
3. During playing status, press “PLAY/PAUSE” key once to pause playing, press
“PLAY/PAUSE” key again to continue playing.
4. Press “PREV” key once to play the preview song, press “PREV” key continuously
to speed up selecting backward. Press “NEXT” key once to play next one, press
“NEXT” key continuously to speed up selecting forward.
5. REPEAT PLAY
：
Press the “REPEAT” key on your remote control(Make sure the
remote control’s battery has power inside) , then it will select full tracks play in
continuous loop. After pressing the “REPEAT” key, you can see “ALL” on the
screen. If you do not want to repeat play, press “REPEAT” key again and the
“ALL” on the screen will disappear. Then it will stop playing when finish playing
last songs.
6. CD Recording: When CD is playing, press the “STOP” key to stop playing firstly,
press “REC” key and the screen will be flashing “USB” or “SD” (It depends on
what memory you have inserted).
If you insert both USB and SD card to the
product, you can choose USB or SD to save the recorded CD music by pressing
“PREV” key or “NEXT” key.
Then press “REC” key again and the screen will be
flashing “the number( such as 001) of songs in the CD)”. At this moment, press
“PREV” key or “NEXT” key to choose which songs(001, 002, 003,…… etc.)
you want to record into USB or SD. Then
press the “REC “key to start recording.
At this time, the screen will flash “COPY”. It will automatically stop when
recording is completed. Press the STOP key for stop recording.
7. Press STOP to end up the play.
PHONES OUTPUT/EARPHONE JACK
1. The turntable can be connected to amplifier or speakers by 3.5mm HEADPHONE
jack, and you can get the 3.5mm to RCA audio
converter
to other audio jack.
2.
Private listen of earphone also can be realized through this jack.
TIPS FOR BETTER PERFORMANCE
1. When opening or closing the turntable cover, handle it gently, moving it either at
the center or equally from both sides.
2. Do not touch the stylus tip with your fingers; avoid bumping the stylus on the
turntable mat or a record’s edge
3. Clean the stylus tip frequently, using a soft brush with a back-to-front motion only.
4. If you use a stylus cleaning fluid, use it very sparingly.
5. Wipe the dust cover and turntable housing gently with a soft cloth. Use only a small
amount of mild detergent solution to clean the turntable and dust cover.
6. Never apply harsh chemicals or solvents to any part of the turntable system.
7. Prior to moving the turntable, always unplug it from the AC outlet and fasten the
tone arm on the tone arm rest with the vinyl twist-tie.
HOW TO REPLACE THE NEEDLE
To replace the needle, please refer to the instructions below.