Delayed Output Pulse Duration Jumpers (on-board)
NL405
Component View of PCB
"Delayed Output" Pulse Duration
Delayed Output Pulse Duration Selection
500 µs
5 µs
150 µs
1.5 µs
50 µs
0.5 µs
Setting
Jumpers
Setting
Jumpers
The Duration of the pulse at “DELAYED OUT” can be set to one of six (6) pulse durations and is set by two
jumpers on the PCB.
These are altered by pulling them off their pins, moving them to where is required and pushing them back on.
Both jumpers MUST be fitted in one of the six configurations shown below.
We reserve the right to alter specifications and price without prior notification.
First Issued:
December 19, 2002
Last Revision:
March 26, 2003
Printed:
March 26, 2003
File Reference:
N:\Docs\Company\Manuals\NeuroLog \ NL405-02.lwp
Users Manual
NeuroLog™ System
NL405
Digitimer Ltd
Page 5 of 5
Copyright © 2003
E-mail:
Tel:
+44 (0)1707 328347;
Fax:
...373153
Website:
www.digitimer.com