background image

C

C

ongratulations, and thank you for your purchase of the Digitech XP-100. The XP-100 offers not one,

not two, but numerous effects in one compact heavy duty pedal chassis design. With the XP-100, you get
classic Wah effects, Pitch shifting, Whammy effects, along with a Volume controller and a Chromatic tuner.
To keep things quiet, the XP-100 even comes equipped with an adjustable Noise gate.  
This owner’s guide is provided to get you up and going with the XP-100 and use it to its full potential. 

Front and Rear Panel Controls and Functions 

1

.    

Signal LED 

- Indicates that signal is entering the XP-100.

2.    

Clip LED 

- Indicates that signal is clipping in the XP-100.

3. 

Status Display 

- The Status Display window shows the current information including: bypass, current

effect program number, and Chromatic Tuner information. When the XP-100 is in Program mode
(Factory or User), the display will either read: 

01-29 

(Factory) or

U1-U6 

(User).  

*Note-

A complete listing of all Factory programs is located on the bottom panel of the XP-100.

4.    

Program UP/(Hold)DOWN Switch 

- Lets you select programs. Pressing once will move up through the

program menu. Press and hold and the XP-100 will move down through the program menu.

5.    

BYPASS/(Hold)TUNER Switch 

- Puts the unit into Bypass by pressing the footswitch once. To select the

Tuner, press and hold the footswitch until the display reads: 

tu

, indicating that you are in Tuner mode.

6.    

Expression Pedal 

- Controls the selected effect or volume.

7.    

Input Level Control 

- Sets the amount of signal being sent into the unit. The ideal setting for the input

control of the XP-100 is to set the input level at a point where the Clip LED indicator occassionally
lights.

8.   

Input Jack 

- Connect instrument here using 1/4” guitar cord.

9.   

Effect Output

- The Effect output sends only the effected signal out.

10. 

Dry Output

- The Dry output of the XP-100 sends only the un-efffected signal out.

11. 

Mode/(Hold)Program-Gate Calibration

- This button is used to put the XP-100 in and out of User

1

4

5

2

3

6

7

8

9

10

12

11

Reviews: