When the radio ON, user has five ways of tuning into desired station.
MANUAL TUNING
FM step : 100kHz, LW step: 3kHz, SW step: 5kHz ,
AM step: 9kHz or 10kHz
Select your desired band, short press UP or DOWN button, the frequency
will be changed as per the following step:
TUNING IN STATION
10
AUTO TUNE TUNING
Select your desired band, hold down UP or DOWN button for 2 seconds,
the frequency will be changed per same step as manual tuning. The radio
will stop automatically when tuning in station.
AUTOMATIC TUNING SYSTEM(ATS)
Select your desired band ,hold down FM, LW, MW or SW band button for 2
seconds until you hear a ‘beep’ sound then release the button, “ATS , , ,”
will be displayed; when the radio receive a real station, the LCD displays
“P00 SAVE”,”P01 SAVE”..... by turn. When ATS process is completed, the LCD
displays “P00 LOAD” .
USING TUNING KNOB
Select your desired band, rotate tuning knob to tune in frequency. At the
same time, the user can press “STEP” button to select tuning frequency
speed as STOP/FAST/SLOW.
Set “STOP”, when rotate the tuning knob, the frequency will not change;
Set “FAST”, when rotate the tuning knob, the frequency will change as per
specified step: FM 100kHz, LW: 3kHz,SW: 5kHz, AM:9k/10kHz
Set “SLOW”,when rotate the tuning knob, the frequency will change as per
specified step: FM 10kHz, LW/MW/SW;1kHz
USING 0~9 numeric keypad
The user also can rotate “FINE Tuning knob” up or down on the lower right
sight of unit to tune in accurate frequency per 1kHz step as a subsidiary help.
Select your desired band, quickly press “FREQ” button to key in desired frequency,
When input completed frequency, the system will confirm automatically. e.g. FM
98.55MHz, when key in 9-8-5-5, the LCD will display 98.55MHz automatically.
If the frequency isn’t completed, e.g. FM 98.50MHz,the user needs to key in 9-8-5-0
to confirm it.
: If the user keys in incorrect frequency out of FM, LW, MW or SW specified range,
the system will display “Error”.
Note
