Setting up Pro Tracks
™
for Vx400 Audio
1. From the Pro Tracks menu bar, select
Options>Audio
. The
Audio Options
window will appear.
Click the
Drivers
tab.
2. Under the
Input Drivers
settings, select
DigiTech USB 1-2 In/Out
and
DigiTech USB 3-4 In
Only
and deselect all other options.
3. Under the
Output Drivers
settings, select
DigiTech USB 1-2 In/Out
and deselect all other
options.
4. Click the
OK
button.
5. Click the
OK
button when the window stating changes will be saved upon re-start appears.
6. Close the Pro Tracks application. When you are prompted to save changed, click
No
.
7. Re-start the Pro Tracks application again.
8. Close the
Tip of the Day
and
Quick Start
windows if they appear.
9. From the Pro Tracks menu bar, select
Options>Audio
.
10. Verify that the Playback and Record Timing Master settings have
DigiTech USB 1-2 In/Out
select-
ed. If not, select these now.
11. Click the
Wave Profiler
button at the bottom.
12. Click the
Yes
button to continue performing the tests.
13. When the profiling operation is successfully completed, click the
OK
button.
14. Click the
OK
button to close the
Audio Options
window if it is still open.
You are now ready to use the Vx400 with Pro Tracks recording software.
CAUTION: Do not disconnect power or disconnect the USB cable from the Vx400 or the
computer while the Pro Tracks software is running. Doing so can result in unpredictable
behavior from your computer’s operating system.
26
The Vx400 and Recording
