19
Clearing The TRIO+ Band
Clearing a song part allows you to re-teach the TRIO+ the part — for example, if you made a mistake during the
last pass or wish to play something different for the part.
NOTE: If a loop has been recorded with the band, the loop will be cleared and restored along with the
band part.
To clear/restore a song part:
1. Press the BAND footswitch to stop band playback.
2. Select the part you want to clear using the PART buttons (the brightest button is the selected part).
3. Press and hold the BAND footswitch for 2 seconds until the BAND LED turns off and then begins flashing
red slowly.
TIP: If a part is accidentally cleared, immediately press and hold the BAND footswitch again for 2
seconds to restore the song part (the BAND LED will turn green, indicating the part has been restored).
Only the last cleared part can be restored.
Playing/Switching Between Song Parts
To switch between song parts while playing the song:
1. Select the first part to play by pressing the corresponding PART button.
2. Press the BAND footswitch to begin playback of the part.
3. At any time while the song is playing, press the PART button for the next part you want to play. Or, for
hands-free control, press and hold the BAND footswitch for approximately 2 seconds to advance to
the next part. The cued part's button will flash at its learned tempo, indicating that it is cued to play
synchronously as soon as the current part reaches its end. Repeating this process again before the part has
changed will advance to the next subsequent learned part — for example, to go from part 1 to part 3.
TIP: Alternatively, the FS3X can be used to advance parts. See
'Using An FS3X Footswitch' on page 32
for more information on FS3X Footswitch control.
NOTE: When tempos are close between parts and a new part is selected while the previous part is still
playing, the new part tempo will be matched to the previous part tempo — indicated by the new PART
button flashing in sync with the ALT TIME LED. If the tempo of the newly selected part is significantly
different from the current part, the tempo will not be matched and the new PART and ALT TIME LEDs will
flash at a different rate.
Summary of Contents for TRIO+ Band Creator+ Looper
Page 1: ...OWNER S MANUAL...
