Effects
The Effects row in the RP200 Artist is a multi-function module, allowing you to select effects
such as; Chorus, Flanger, Phaser,Tremolo, Panner,Vibrato, Rotary Speaker,YaYa™, AutoYa™,
SynthTalk™, Envelope Filter (auto wah), Detune, Pitch Shift, and Whammy™ effects. When the
Effects row is selected, the Parameter 1 knob is used to choose the type of Effect or turn the
Effect module off (
eff Of
). Only one of the effects in this row can be used at a time. After
selecting the type of effect in this module, the Parameter 2 and Parameter 3 knobs can then
be used to adjust the individual parameters associated with the selected effect.The following list
describes each Effect and their Parameters in more detail:
Chorus (
CHORUS
)
A Chorus adds a short delay to your signal.The delayed signal is modulated in and out of tune
and then mixed back with the original signal to create a thicker sound.
Amount - The Parameter 2 knob simultaneously adjusts the rate (Speed) and intensity
(Depth) of the modulation. Ranges from
1
to
99
.
Level - The Parameter 3 knob controls the mix level of the Effect. Ranges from
0
to
99
.
Flange (
FLaNge
)
A Flanger uses the same principle as a Chorus but uses a shorter delay time and adds
regeneration (or repeats) to the modulating delay.This results in an exaggerated up and down
sweeping motion to the effect.
Amount - The Parameter 2 knob simultaneously adjusts the rate (Speed) and intensity
(Depth) of the Effect. Ranges from
1
to
99
.
Level - The Parameter 3 knob controls the mix level of the Effect. Ranges from
0
to
99
.
20
