DigiTech RP100A, User Manual

Page: 21 / 37

Pickup/Wah
The Pickup Simulator lets you get the thick tone of a humbucker pickup from a guitar with
single coil pickups, or the bright edgy sound of a single coil pickup from a guitar with a
humbucker.This allows you to have the best of both worlds without having to change guitars
during a performance.
Wah is an effect controlled by an Expression Pedal making the guitar sound as if it’s saying “Wah.”
Pickup Type - The Parameter 1 knob selects the Pick Up type which will be simulated.
of
- Turns the Pickup Simulator off.
hb
- Gives a single coil pick up the warm tone of a humbucker.
sC
- Gives a humbucker the unique sound of a single coil.
Wah Type - The Parameter 2 knob selects the Wah Type.
of
- Turns the Wah Effect off.
cr
- Cry Wah is a traditional sounding Wah.
bt
- Boutique Wah is a wider sweeping Wah with a more modern sound.
fr
- Full Range Wah sweeps the entire spectrum of audible frequencies.
Wah Position - The Parameter 3 knob adjusts the Wah Pedal Position. Ranges from
0
(toe
up) to
99
(toe down).
Compressor
A Compressor is used to increase sustain, tighten up guitars, and prevent the signal from clip-
ping the input of other effects. It sets a maximum boundary for the strength of a signal.
Comp Type - The Parameter 1 knob selects the Compressor Type (Attack).
of
- Turns the Compressor off.
1
to
3
- Controls the length of time it takes for the Compressor to respond to
a signal exceeding the boundary.
16