Flexible Output Mode
TM
The Red Special Pedal has three Flexible Output Modes
TM
: Mono, Stereo
Mixer and Stereo Amp. These modes let you send a mono signal to an
amp or mixer, or a stereo signal to two amps or two channels of a mixer.
Mode 1 (MONO) is the default output mode when one cord is plugged
into either the OUT 1 (AMP) or OUT 2 (MIXER) output.
Mode 2 (STEREO MIXER) and Mode 3 (STEREO AMP) are enabled when
two cords are plugged into both the OUT 1 (AMP) and OUT 2 (MIXER)
outputs. Mode 2 (STEREO MIXER) is the default stereo output mode
selected from the factory. Mode 3 (STEREO AMP) is enabled by selecting
STEREO AMP mode via the Flexible Output Mode Setup. Once Mode 3 is
selected, you can return to Mode 2 (STEREO MIXER) using the Flexible
Output Mode Setup.
Please refer to the
Flexible Output Mode Setup
section for more
information.
Flexible Output Mode
TM
Setup
1. Power up the Red Special Pedal.
2. Select Model 7 using the
MODEL
knob.
3. Press and hold the
HEEL SWITCH
for three seconds. The
INDICATOR LED
begins to flash yellow.
4. Release the
HEEL SWITCH
.
5. Turn the
MODEL
knob to Model 6 to select
STEREO AMP
mode,
or leave the
MODEL
knob at Model 7 to select
STEREO MIXER
mode.
6. Press the
TOE SWITCH
to exit Flexible Ouput Mode Setup; the
INDICATOR LED
turns off.
NOTE
: Keeping the
MODEL
knob set to Model 7 will leave the pedal in
STEREO MIXER
mode (Flexible Output Mode 2). Selecting any other
Models besides 6 or 7 will prevent you from exiting Flexible Output
Mode Setup.
Summary of Contents for BRIAN MAY RED SPECIAL PEDAL
Page 1: ......
