DigiTech BASSS QUEEZE, Manual

Page: 4 / 12

The Bass Squeeze Compressor is a studio quality, dual-band compressor
for bass guitar. Featuring dbx
®
dynamics processing courtesy of
DigiTech’s AudioDNA™ DSP engine, the Bass Squeeze provides the
versatility you will need for a variety of applications. Whether you are
mildly compressing the lows and highs, or doing radical tone shaping, you
will find that the Bass Squeeze will be an indispensible part of your rig.
1. Level Knob
Controls the effect’s output level. Turn this knob clockwise to increase
the output level, and counter-clockwise to decrease output level. With
the LO BAND and HI BAND knobs at their minimum position, turning
the LEVEL knob to its maximum position gives you unity gain.
2. X-Over Knob
Controls the crossover frequency separating the LO BAND and HI
BAND compressors. The X-Over’s minimum position is 100Hz and
maximum position is 3kHz. Frequencies below the crossover setting are
controlled by the
LO BAND compression knob. Frequencies above
the crossover setting are controlled by the HI BAND compression
knob. Experiment with this control in conjunction with the LO and HI
BAND knobs to determine the best position for your application.