11. Out 2 (Mixer) Jack
This output features DigiTech’s CIT™ cabinet modeling technology, that
lets you run the pedal directly into a mixer or recorder input without
having to use a bass amplifier. The CIT model is based on a 4x10
cabinet.
Connections
The Bass Squeeze has a single input (INPUT) and a pair of outputs (AMP
and MIXER). The two outputs give you the following options: running
into a bass amplifier, running directly to a mixing console or recording
device, or both. The MIXER output uses DigiTech’s advance CIT™
cabinet modeling technology for an authentic bass amplifier sound
without using an amp.
Follow these setup directions:
1.Turn the volume down on the amplifier/mixer you are connecting to.
2. Connect the pedal output to the amplifier/mixer input.
3. Connect the bass to the pedal input.
4. Connect the power supply to the pedal (optional).
5.Turn the
LEVEL
knob on the pedal to the maximum position and the
LO
and
HI BAND
knobs to the minimum position.
Bass Squeeze Manual 8/20/02 10:43 AM Page 8
