3. ALARM TIME SET
* With the radio in the OFF mode, press the ALARM key and the LCD will display the alarm time and the alarm
symbol
. Then press the TIME key: the 12 and will flash on LCD, press SCAN UP or SCAN DOWN key to adjust the
alarm hour,
* Press TIME
key again and the 00 and
will flash on the LCD, press SCAN UP or SCAN DOWN key to adjust the
minute.
* Then press TIME again and choose either BUZ (Buzzer) or RAD (Radio) with the SCAN UP or SCAN DOWN keys. If you
choice BUZ, then the alarm will produce a BUZZER sound, If you choice RAD, then the alarm will be the current set
radio station
* After that, press
TIME
to finish, or hold still 5 seconds it will end automatically.
* The
logo display on the LCD means the alarm is ON. To switch ON/OFF the alarm press the ALARM Key.
* After replace battery alarm has to be reset for desired time.
4. SNOOZE FUNCTION
If choice the Alarm sound as BUZ, When alarm sound on, Then press SNOOZE key, then sound off, after 5 minutes, the
alarm sound on again. If choice the Alarm sounds as RAD, do not have this SNOOZE function.
5. RADIO OPERATION
5.1) Locate the ON/OFF Power Button
Press the ON/OFF button to turn on the radio. Press ON/OFF button again to turn off the radio.
5.2) Band Switch
After the radio has been turned on, press the BAND key to select FM-AM-SW station.
5.3) In SW mode, keep press BAND key for several seconds, the SW logo on LCD will flash, then you can use SCAN UP key or
SCAN DOWN key to switch SW from SW1 to SW9
5.4) Search Station
* After the bands selected, press SCAN UP or SCAN DOWN key to adjust the station frequency on LCD to search your
desired station program.
* If you hold down the SCAN UP or SCAN DOWN key for several seconds, the radio will auto scan the frequency till a
station in found.
* Pull out the antenna and adjust to receive stronger signal.
5.5) Memo station
* After station program is selected, and if you want to set this program to memory, you can press the MEMO button. A
number on the top left corner of the screen will flash. You can press M+ or M- to choose the desired number (0-19)
to save the station, then press MEMO key to finish the memory save.
* Automatic Memory Function: With the radio on, press and hold the MEMO button for several seconds, the radio will
then search for the clearest signals and store the first 20 stations to memory.
* With the radio on, you can press M+ or M- to choose the preset radio stations.
* Each Radio Band can store up to 20 preset radio stations.
* The preset stations will be stored in the radio even after the batteries have been removed.
5.6) FREQUENCY RANGE: (FM-Frequency Modulation, SW-Short Wave Frequency)
Press "BAND" key to adjust frequency below:
FM: 87.6 - 108MHz MW: 522 - 1620KHz
SW1: 4.75MHZ –5.95MHZ SW6: 13.6MHz---15.MHZ
SW2: 5.95MHz -7.10MHZ SW7: 15.1MHz—17.5MHZ
SW3: 7.10MHz--9.5MHZ SW8: 17.5MHz---21.45MHZ
SW4: 9.5MHz—11.65MHZ SW9: 21.45MHz-----21.85MHZ
SW5: 11.65MHz—13.6MHZ
6. LOCK FUNCTION
Press and hold the KEY- LOCK button for several seconds, there will be a key logo displayed on the LCD, this means that
all of the buttons will be locked and will not work.
To unlock the buttons - Press and hold the KEY LOCK button again for several seconds and the key logo will disappear
and unlock all the buttons.
