5
Installation Diagram
Application 1: Listen to the TV sound without turning the volume of the TV loudly.
In this scenario, the transmitter unit should be located around the TV set
Tx installation
Step1: Take out the main unit
Step2: Take a 3.5mm
Audio RL cable, connect the 3.5mm connector to the 3.5mm socket
on the transmitter unit, another RL connector to the “Speaker out” or “line out” of
your TV set
Step3: Take out the AC/DC adaptor, plug the barrel end to the DC socket of AA-2102, the AC
blade end to your AC outlet. Please note not to overload your AC outlet.
Receiver Installation
Via AA Batteries powering
Step1: Take out the receiver unit
Step2: open the batteries compartment
Step3: Install 2 new AA batteries as figure shown (please make sure of the polarity)
Step4: Close the Batteries compartment
DC jacket
Speaker out/line out
Batteries
Close the compartment
Finish
