DL-HDE100-H2 Owners Manual
6
Receiver / Front and Back View
1. DC 12V
- Locking power supply port (transmitter)
2. HDBT IN
- HDBaseT input; RJ45 connection
3. IR IN
- 3.5mm IR input port for connection to IR receiver or 3rd party IR system
4. IR OUT
- 3.5mm IR output port for connection to IR emitter
5. RS232
- 3 pin Phoenix connector port for passing RS232 control to transmitter location
6. HDMI IN
- HDMI input port for connection to HDMI video source
7. ETHERNET
- RJ45 port for passing Ethernet to transmitter location
Front Panel LED States for Transmitter / Receiver
POWER
(RED) - Solid when device is powered ON
STATUS
(BLUE) - When blinking the device is working properly
HDCP
(BLUE)
- Solid when HDMI signal is encrypted; blinking
when non -HDCP protected content is transmitted; OFF when
no content is being transmitted
LINK
(GREEN) - Solid when successful link between transmitter
and receiver is established; off or blinking indicates a physical
link error
