Transmitt er View
1
2
3
4
5
6
7
1. DC 18V
•
Locking power port, connect DC18V power adapter (either power port can power enti re set)
2. Twisted Pair
•
RJ45 HDBaseT connecti on. Connect Cat6 cable to transmitt er
3. IR In
•
3.5mm IR input port for connecti on to IR receiver or IR system
4. IR Out
•
3.5mm IR output port for connecti on to IR emitt er
5. RS232
•
3 pin Phoenix connector port for connecti ng / passing RS232 control
6. HDMI In
•
HDMI input port for connecti ons to video sources
7. Mode -
Normal-
for normal operati on.
Update-
for fi rmware update process
•
The mode switch is used when updati ng fi rmware in the extender. A separate document will
provide usage instructi ons once a new fi rmware update is available.
Front Panel Diagnosti c LEDs:
The DL-HD70 provides four blue LEDs to indicate the current operati ng status and to assist
troubleshooti ng an installati on.
Power:
Solid
, the DL-HD70 extender is receiving power from the power supply or from the
remote extender via Category 6 cabling.
Status:
Flashes once per second
, the HDBaseT processor is running.
Link:
Solid
, the two DL-HD70 extenders are communicati ng via Category 6 cabling.
HDCP:
Solid
, HDCP signal is present in the HDMI stream.
Flashes quickly
, no HDCP signal is
present in the HDMI stream.
