DIGITAL YACHT
WL50 (MK2) Quick Start Guide
Windows will now search the CD-Rom for the correct drivers and install them. While it is searching and installing, you will
see the window shown in Figure 11. When it has completed and the drivers are successfully installed, you will be shown
the window in Figure 12.
You can now close this window and the Device Manager window and you are ready to use the WL50 to find and connect
to a wireless hotspot. Proceed to the “Operating WL50 on Windows Vista and Windows 7” section.
Installation for Windows XP
The easiest method of installing the drivers on a
Windows XP computer is to run the Setup.Exe file that is
on the CD-Rom. This installs both the drivers and the
Realtek Utility that can be used in place of the normal
Windows Wireless Zero Configuration program that came
with Windows XP. The same Setup.Exe program can be
used for installing the WL50 on Windows Vista or
Windows 7 PCs but we would always recommend
following the On-Line or Off-Line procedures detailed in
the previous sections.
Navigate to the Setup.Exe file on the CD-Rom, by
clicking the Start button and then clicking on “My
Computer”. Click on the CD-Rom and then click on the
“WL50 (+Pro) Drivers” folder. Finally run the Setup.Exe
program by double clicking on it – see Figure 13.
When the Setup program runs you will see the initial window shown in Figure 14. Click the “Next” Button and you will see
the progress bar window in Figure 15. Once everything has been installed, you will see the Wizard Complete window in
Figure 16. Click the “Finish” button to complete the installation.
Figure 12
Figure 11
Figure 13
Figure 14
Figure 16
Figure 15
