DIGITAL YACHT MUX100, Product Handbook

Page: 3 / 4

Fixing location drawing
Installation Step 3

Provide power connections to the unit. Power is connected to the PWR/DATA cable on the Red and
Black wires. The Red wire is the positive (+) connection. The Black wire is the negative (-)
connection.

Connect the stripped wires to the fused power cables that you routed to the MUX100 in step 1.
Installation Step 4

The MUX100 Multiplexer can now be connected to
the other NMEA0183 compatible equipment via the
NMEA0183 connections on the PWR/DATA cable.
A table showing what each of the wires of the
PWR/DATA cable does is printed on the MUX100
and repeated here for your convenience.

A typical MUX100 installation is shown on the next
page.

Installation is now complete