DIGITAL YACHT LTD
iNavHub Quick Start Guide
To test and prove that the system is working, you can download our free iAIS app from the Apple store and the following
guide assumes that you have already done this.
Go to the Settings>Wi-Fi and ensure that your device is wirelessly connected to the iNavHub network.
Run iAIS and go to the Instruments>Setup>TCP/IP menu. Select UDP mode, Port 2000 and then switch the Link button
to ON. You should now see the raw NMEA 0183 data being received in the monitor window as shown below;
This proves that the iNavHub is correctly converting NMEA 0183 data to wireless data which can be used in any UDP
compatible app that you wish to use.
