Quick Start Guide for iNavConnect V3.01
TEL + 44 1179 554474 www.digitalyacht.co.uk
1. Introduction
Congratulations on the purchase of your iNavConnect Wireless Router. It is recommended that your router is installed by
a professional installer. If the iNavConnect is to be connected to the internet via a Digital Yacht WL510 long range Wi-Fi
Adaptor or to a Fusion or other marine network, it is recommended that this installation/configuration is carried out by
someone with suitable IT experience and knowledge of Ethernet networks.
The iNavConnect can be used in the following configurations;
1) As a simple Wireless Access Point or Wireless Router for setting up a wireless network on-board a boat
2) In conjunction with a Digital Yacht WL510 to share the long range internet connection with everyone on-board
3) With a Fusion 700/750 series marine entertainment system allowing control via the Fusion-Link app.
4) A combination of the above configurations
Before operating the unit you should familiarise yourself with this Quick Start manual and any manuals
for the equipment you intend to interface with iNavConnect.
2. Before you start
You will need the following items and tools to complete the installation:
•
The iNavConnect Router
•
RJ45 Cat 5 cable to connect between the iNavConnect and your Ethernet network
•
A connection to the
boat’s 12v/24v DC supply where the unit is to be installed.
•
M3 or M4 screws or other fixings appropriate to the mounting location.
To test and configure the iNavConnect you will need:
•
A PC, Mac, iPhone/iPad or other wireless device that has a web browser such as IE, Chrome, Firefox, etc.
To connect the iNavConnect to a Fusion 700/750 series, you will need a:
•
Fusion 700/750 Series system
•
A standard RJ45 Network cable
•
A latest copy of the Fusion-Link App running on a compatible iPhone/iPad or Android Device.
To use the iNavConnect to share a long range Wi-Fi internet connection on board the boat, then you will need a;
•
Digital Yacht WL510 Long Range Wi-Fi Adaptor
3. Installation
Before starting installation select a suitable location for the iNavConnect Router. The unit is designed for below deck
mounting on board a boat and is not water resistant. It should be installed in a cool, dry location and can be mounted on a
vertical or horizontal surface. When locating the unit you should consider:
•
Routing of power and network cables to the unit.
•
Provision of sufficient space around the unit for cable connections.
•
Routing of optional network connections to a WL510 Long Range Wi-Fi Adaptor (if necessary).
•
Maintaining the compass safe distance of 0.5m.
•
Best location for Wi-Fi reception i.e. not inside a metal enclosure
