DIGITAL YACHT LTD
HSC100 Quick Start Guide
During the auto-calibration process, the Blue Status LED on the HSC100 will flash as follows;
State 1
Un-calibrated
long flash
State 2
In the process of calibration
continuous
State 3
Calibrated
short flash
If something should happen that stops you from safely completing the calibration, such as a vessel approaching or an
obstruction, press and hold both push buttons together for 1 second. This will cancel the calibration and leave the unit in
an un-calibrated state.
If the calibration completes successfully, the HSC100 Status LED should change from being on continuously to short
flashes.
Once calibrated, it is important to zero any alignment offset and this is done by steering the boat to North (000º) as per
the conventional magnetic steering compass or failing this the GPS course over the ground (make sure GPS is set to
display magnetic headings). Once you are happy that the boat is steering a course of 000º degrees (magnetic), press
push button Switch 2.
Calibration and Alignment is now complete.
