DIGITAL YACHT LTD
AquaPro 2 PC Quick Start Guide
Connect a USB mouse and keyboard to any of the six USB ports on the AquaPro PC
Connect a suitable monitor or monitors to the VGA and/or HDMI connectors on the AquaPro PC
To connect a remote power switch for the AquaPro PC, at another location in the boat, simply remove the white
wire from the red wire
and connect the white wire to the ship’s supply (+12v or +24v) via a SPST toggle switch as
shown below.
Once all devices are correctly connected to the AquaPro PC ensure the 12v or 24v power is connected i.e. the
circuit breaker is ON (if fitted) and then turn on the remote toggle switch and the AquaPro PC will power up. As
you turn on the remote switch, the Power and Hard Disk LEDs on the front face of the AquaPro PC should come
on as the PC starts it’s power up sequence.
NOTE
– when using the remote switch configuration, there is a 5 second delay between pressing the switch and
the power up or power down sequence initiating.
Installation is now complete.
White
Wire
SPST Toggle
Switch
+12v/24v
Supply
