1. Introduction
Congratulations on the purchase of your Aqua Wear WLN20 Wireless NMEA
Server. It is recommended that your product is installed by a professional installer,
particularly when it comes to interfacing with other equipment.
Before installing and operating this unit you should consult the user
manual of the navigation equipment that you are connecting this unit
to.
2. Before you start
You will need the following items and tools to complete the installation:
The WLN20 Receiver (supplied)
A 12V or 24V DC power connection where the unit will be installed
M3 or M4 screws or other fixings appropriate to the mounting lo cation (not
supplied).
To receive/display wireless data from the WLN20 you will need:
Suitable navigation software running on a PC, iPhone/iPad, Android
Phone/Tablet, Mac or other wireless device.
A device with an NMEA 0183 data output/input at either 4800 baud or
38,400 baud
3. Installation
Before starting installation, select a suitable location for the WLN20 device. The
unit is water resistant to IP65 and can be mounted on deck or below deck in a dry
location. Avoid mounting the unit in a location where the unit could become
completely immersed in water.
