Quick Start Guide for Aqua Compact Pro 10
th
Generation V3.00
TEL + 44 1179 554474 www.digitalyacht.co.uk
•
Both the Aqua Compact Pro and Pro+ PCs typically consume 1A or less under normal conditions but will
consume more power (i3 up to 6A and i7 up to 8A) if you are doing lots of graphic calculations or powering lots of
USB devices.
•
Ensure a suitable in-line fuse or circuit breaker is fitted (recommend 10A).
•
Run any USB or NMEA interfacing cables to the location where the Aqua Compact Pro PC will be mounted, but
do not make any connections yet.
The USB Interface Standard specifies that USB cables should be no longer than 5m without using a
special powered USB extender cable
– ensure that the total USB cable length from the Aqua Compact Pro
PC to any USB device is < 5m.
Installation Step 2
•
The Aqua Compact Pro PC is supplied with a mounting bracket. Use suitable fixings (not supplied) to fix the Aqua
Compact Pro PC to a flat surface
– using the dimensions and details shown in the image below. Note that the unit
may be installed in any orientation.
Dimensions
Mounting Plate
