Digital Watchdog VMAX960H CORE User Manual Download

Page: 18 / 113

User’s Manual | 18

[9 Ch]

[16 Ch]

To select a channel to view in single channel mode, click on the channel using the USB mouse. To return to the previous

display mode, click anywhere on the screen again.

To view the pop-up menu, right-click anywhere on the display screen.

OTE

To select a channel using the mouse, perform a slow and clear click of the left mouse button.

3.3.3 Icons

The live mode display’s icons or messages will be indicated on the screen to indicate the system mode or status.

Below are the icon categories that are indicated on the monitor:

Icon to be shown

at Left-upper corner on each channel screen

Icon to be shown

at Left-bottom corner on full screen.

Continuous Recording

Sequence display on

Motion Detection Recording

Digital zoom on

Sensor Activating Recording

Audio Channel

Con Motion Recording

Cont Sensor Activating

Recording

Emergency Recording

OTE

If you cannot find any colored-mark in the top right corner of the live screen mode, then the system is not
set to record any image. Check the recording schedule or camera in the main setup menu.

To show the menu bar, move the mouse’s cursor to the

bottom of the screen. The menu bar will be displayed.

To hide the menu bar, move the mouse’s cursor away from

the menu bar.

Right-click the USB mouse to access the pop up menu.

Summary of Contents for VMAX960H CORE


















































































































Search results

Summary of Contents for VMAX960H CORE

Reviews:

Related manuals for VMAX960H CORE

Brands by name

Popular brands

Digital Watchdog VMAX960H CORE, User Manual

Search results

Summary of Contents for VMAX960H CORE

Reviews:

Related manuals for VMAX960H CORE

Brands by name

Popular brands