Digital Watchdog VMAX User Manual Download Page 98

Page: 98 / 123

97 | Chapter 3: Mac ACS (Advance Client Software)

6.3.2 Main Toolbar

No.

Button

Description

Site Manager

Connect

Connect to a selected DVR site, listed on the DVR list panel.
Select Live or Search mode at Connect Mode Panel.

Disconnect

Disconnect a selected channel.

Disconnect All

Disconnect All Channels.

Print out still image.

JPG Export

Save a selected image to the desktop in JPEG format.

MOV Export

Save a selected video clip to the desktop in MOV format.

Split

Channel Display Mode 1 – 4 – 9 - 16

6.3.3 Site List Panel

The Site List Panel shows the list of registered DVRs. To connect, select [Live] or [Search] mode in the Connection Mode

Panel and Drag & Drop to the display screen.

16 different channels can be monitored. Even a mixture of different connection modes can be monitored.

Summary of Contents for VMAX




























































































































Search results

Summary of Contents for VMAX

Reviews:

Related manuals for VMAX

Brands by name

Popular brands

Digital Watchdog VMAX, User Manual

Search results

Summary of Contents for VMAX

Reviews:

Related manuals for VMAX

Brands by name

Popular brands