INSTALLATION (cont.)
A. Cut the hole in the ceiling for routing the cables.
B. Loosen the screws from the dome cover.
C. Detach the dome cover from bottom case.
D. Loosen the screws and separate the gimbal.
E. Align the camera unit with the surface of the ceiling, make 3 marks, and
then drill the holes.
F. Pass the power cable and video cable through the cable hole in the ceiling.
G. Match the holes of camera unit with the holes in the ceiling and then fix the
camera unit by tightening screws.
H. Set the gimbal in desired position and tighten the screw.
I. Carry out the settings and adjustment for the camera.
A. Cut the hole in the ceiling for routing the cables.
B. Loosen the screws from the dome cover.
C. Detach the dome cover from bottom case.
D. Loosen the screws and separate the gimbal.
E. Align the camera unit with the surface of the ceiling, make 3 marks, and
then drill the holes.
F. Pass the power cable and video cable through the cable hole in the ceiling.
G. Match the holes of camera unit with the holes in the ceiling and then fix the
camera unit by tightening screws.
H. Set the gimbal in desired position and tighten the screw.
I. Carry out the settings and adjustment for the camera.
J. Assemble dome cover with bottom case.
K. Tighten the screws back on the dome cover.