3
2
PRECAUTIONS
Table of Contents
Introduction
Camera Features
4
Parts
and
Descriptions
5
Dimensions
6
Installation
Inside
the
box
7
Mounting
the
Camera
8
Junction
Box
Installation
9
Wall
Mount
10
Pendant
Mount
11
Corner
Mount
12
Connecting
Cables
13
Adjusting the 3 Axis Gimbal
14
Control
Board
15
Programming OSD Menu and Glossary
16-17
Troubleshooting
18
Warranty and Service
19-20
Specifications
21-22
FCC COMPLIANCE
■
Do not open or modify.
■
Do not open the case except during maintenance and installation,
for it may be dangerous and can cause damages.
■
Do not put objects into the unit.
■
Keep metal objects and flammable substances from entering the camera. It can cause fire, short- circuits,
or other damages.
■
Be careful when handling the unit.
■
To prevent damages, do not drop the camera or subject it to shock or vibration.
■
Do not install near electric or magnetic fields.
■
Protect from humidity and dust.
■
Protect from high temperature.
■
Be careful when installing near the ceiling of a kitchen or a boiler room,
as the temperature may rise to
high levels.
■
Cleaning
■
To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.
■
Mounting Surface
■
The material of the mounting surface must be strong enough to support the camera.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to Provide reasonable protection against harmful
interference .when the equipment is operated in a residential environment. This equipment generates, uses,
and radiates radio frequency energy; and if it is not installed and used in accordance with the instruction
manual, it may cause harmful interference to radio communications.
WARNING : Changes or modifications are not expressly approved by the manufacturer.
