Digital Watchdog STAR-LIGHT PLUS DWC-V6863WTIRW User Manual Download Page 5

1.

Read these instructions. 

-

 All these safety and operating instructions should be read before the product is installed or operated.

2.

Keep these instructions.

-

 The safety, operating and use instructions should be retained for future reference.

3.

Heed all warnings.

-

 All warnings on the product and in the operating instructions should be adhered to.

4.

Follow all instructions.

-

 All operating and use instructions should be followed.

5.

Do not use this device near water. 

-

 For example: near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming

pool, etc.

6.

Clean only with 

dry cloth. 

-

 Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.

7.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 

-

 Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product, 

and to protect it from over-heating. The openings should never be blocked by placing the product on 

bed, 

sofa, rug or other similar surface

s

. This product should not be placed in a built-in installation such as a 

bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have been adhere

d

 

to.

8.

Do not install near any heat sources such as radiators, heat registers, or other apparatus 
(including amplifiers) that produce heat.

9.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet.

10.

 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and 
the point where they exit from the apparatus.

Important Safety Instructions

5

Summary of Contents for STAR-LIGHT PLUS DWC-V6863WTIRW





































Reviews: