Use the diagram below to connect the camera to a Universal HD over Coax
®
DVR
or CRT monitor when the camera is in Coax video output mode (default mode).
12VDC/24VAC
Universal HD over
Coax
®
DVR
Coax
Connecting to Monitors
14
IR
s
witch
ON/OFF
External controller
Test
m
onitor
- Power connection -
the camera supports
12VDC voltage
only.
- All cameras are equipped with a test video output for on-site configuration.
NOTE:
To use your Star-Light Plus™ 5MP cameras at a lower resolution, you must
use a VMAX
®
A1 Plus™ DVR to access the camera's menu due to the cameras
being set to 5MP as the default. A DVR that does not support 5MP resolution may
recognize the camera, but will not deliver a picture
.
- The camera has a manual IR switch, located
under the camera’s lens. You can use this switch to
manually turn the IR LED board on or off according to
the installation needs.