Digital Watchdog STAR-LIGHT PLUS DWC-D3853WTIRW Quick Start Manual Download Page 2

Quick Start Guide

1.   Once all cables have been connected, use the screws included with 

the camera to properly mount and secure the camera to the mounting 
surface. 

2.  Adjust the camera’s pan, tilt and position to achieve the desired view. 

The cameras’ max angles are:  

  Pan: 0° ~ 360°

  Tilt: 0° ~ 70°

  Rotation: 0° ~ 360°

3.  Once the installation is complete, remove the protective cover from 

the camera’s dome cover. 

STEP 4 – INSTALLING THE CAMERA

Copyright © Digital Watchdog. All rights reserved.  

Specifications and pricing are subject to change without notice.

Panning 360°

Rotation 360°

Tilting 70°

Mounting template

Rev Date: 01/20

STEP 3 – CHANGING THE SIGNAL IN 
THE CAMERA

1.   The camera supports HD-Analog, HD-CVI and HD-TVI signals as  
 

well as CVBS up to 960H. To switch between the signals:

 

a. Enter the camera’s OSD menu. You can access it locally from  

 

  using the camera’s joystick in the body of the camera, or from a  

 

  recorder supporting UTC communication.  

 

 

 

  Go to SETUP > OUTPUT.

 

b. Set the camera’s resolution from the following options:  

 

 

  - 4K/2160p @15fps. 

 

  - 5MP/1440 @30fps. 

 

  - 2.1MP/1080p @30fps.

 

c. Set the camera’s analog signal output from the following options:  

 

  - HD-A - HD-Analog 

 

  - HD-T - HD-TVI 

 

  - HD-C - HD-CVI 

 

  - CVBS - legacy analog signal

 

d. Change CONFIRM to ON to save the changes.

 

e. Go to the EXIT menu and select SAVE&EXIT to save all changes.  

 

  The camera signal automatically.

NOTE:

  To use your Star-Light Plus™ 4K cameras at a lower 

resolution, you must use a VMAX® A1 4K DVR to access the 
camera’s menu due to the cameras being set to 4K as the 
default. A DVR that does not support 4K resolution may 
recognize the camera, but will not deliver a picture.

Reviews: