manualshive.com logo in svg

Digital Watchdog STAR-LIGHT DWC-B7753TIR, Manual, Page: 12 / 32

Share
Download
Digital Watchdog STAR-LIGHT DWC-B7753TIR Manual Download Page 12

12

LENS

MANUAL

  Manual mode supports the fixed board lens or the manual iris lens. 

P-IRIS

 

If the camera includes a P-Iris lens, you can select this option to adjust the lens and iris 

 settings.

If P-Iris is selected, adjust the following: 

 

MODE: Select from AUTO or MANUAL. If AUTO is selected, the camera’s iris and lens 

 

will be adjusted automatically. 

 

LIMIT: If MANUAL is selected, the camera’s iris can be adjusted manually using the 

 

LIMIT value. 

DC

 

DC lens mode allows you to setup the camera for indoor or outdoor modes. 

If DC is selected, adjust the following options: 

 

MODE: Select from INDOOR or OUTDOOR 

 

IRIS SPEED: Set the reaction speed of the camera’s iris. 

 

If OUTDOOR mode is selected, you can adjust the minimum and maximum shutter 

speed. By default, the MIN SHU is set to 1/30. The MAX SHU can be adjusted as needed. The lower 

the number, the darker the image will appear in bright areas.

Summary of Contents for STAR-LIGHT DWC-B7753TIR

































Reviews:

No comments